CRUISE CONTROL COMMAND MODULE 

• ON/OFF
• ON/OFF LAMP
• SET/ACC
• RES/DEC
• COAST
• 2 MEMORY PRESETS

This control allows you to tap up or tap down the set speed by 1kph/0.62mph.

The Cruise Control systemhas built-in safety features which will automatically disengage the system if one or more of the following occur:-

1.Depressing the brake pedal.
2.Press the OFF/Coast button of the command module/stalk.
3.Over-rev of the engine (requires clutch switch or RPM sensing to be installed).
4.Decelerating to below 75% of the set speed.
5.Over speed dropout at 150%above the set speed.
6.Brake light bulbs or brake light fuse failure.

Left hand side steering column stalk. This allows the cruise system to be switched on/off andto be set to the required speed with an up/down control. It also has 2 memories that allowthe vehicle speed to be set to previously stored value